Wright Dip Stain Kit (4 x 950mL)

THIS HAZMAT ITEM CANNOT BE PURCHASED ONLINE. TO ORDER PLEASE CALL (732) 447-2593.

• Solution I - Fixative
• Solution II - Wright or Wright Giemsa Dip Stain
• Solution III - Matching Buffer
• Solution IV - Alcohol Wash

IN THE EVENT OF COLD WEATHER, allow solutions to return to room temperature and SHAKE WELL BEFORE USE.

CONTENTS: Wright Stain, Giemsa Stain (as indicated), Methanol, Buffers, Stabilizers

These solutions are made from certified dyes (when applicable).

FOR IN VITRO DIAGNOSTIC USE ONLY.

RECOMMENDED PROCEDURE: Fix slide in Sol. I for 30 seconds. Place in Sol. II for 3 minutes followed by Sol. III for 1 minute. NOTE: The color can be varied by either increasing or decreasing time in Sol. III (Matching Buffer). For a more basic stain (blue), decrease time in Sol. III; for a more acid stain (red), increase time. Dip slide in Sol. IV for 3 - 5 seconds. NOTE: Due to evaporation and absorption of moisture, it may be necessary to increase time in Sol. I (Fixative) to 1 minute, Sol. II (Stain) to 3.5 minutes, Sol. IV (Alcohol Wash) may be increased to 30 seconds. Solutions should be changed after a 24 hour period with cleaning of all reagent containers. Solutions should be replenished during staining period.

NOTE: Due to the variations in the oxidation of a methylene blue stain, our Wright, Wright Giemsa and May-Grunwald Giemsa stain products are offered with a matched buffer solution of specific pH in order to obtain consistent and uniform staining characteristics from lot to lot. As a result, we recommend our matched buffer solution be used for obtaining optimum results. However, stain and buffer are available separately.

Safety Data Sheet - Wright/Wright Giemsa Dip Stain Kit (Solution I)

Safety Data Sheet - Wright Dip Stain Kit (Solution II)

Safety Data Sheet - Wright/Wright Giemsa Dip Stain Kit (Solution III)

Safety Data Sheet - Wright/Wright Giemsa Dip Stain Kit (Solution IV)